bravo1jon
GAINING SPEED
Why is my finger more sticky to glue than the plastic?
Posts: 341
Likes: 817
|
Post by bravo1jon on Apr 23, 2021 10:25:47 GMT -6
Pocher 1/4 scale Ducati multi-media kit. The kit has over 900 parts made of metal, plastic, rubber and resin. This is the 1st Ducati in a series 3 bikes. I have built the first two and have preordered the 3rd and last edtion aptly named the Ducati Final Edition due out in late July. The kit can be built straight out of the box using the Phillip's head screws from the factory, some CA glue and all of the pre-painted parts OR here's what I did: - All of the parts are stripped down to bare metal and repainted using the correct OEM Ducati paint. - All of the factory screws, bolts and any other hardware is replaced with scale correct hardware. - The Factory kit does not represent any of the wiring so all of the wiring is created from scratch. This is the most challenging part of the build and can drive you nuts so getting proper reference is key. If you want to do one of these please message me and I'll provide you with all the info you will need to make a really cool bike. - Numerous lines , connectors, plugs and cables and recreated. - LED lighting system that works from a remote. - custom decal set that matches Troy Bayliss Davies Team Ducati championship bike. Hands down the most challenging kit i've ever done. Its nearly made me quit on the first bike. They are also very hard to find since they were limited run productions so if you want to do one get on the preorder list at pocher.com ASAP or they will be gone. As you may expect these are not cheap but well worth it. Thanks for looking.
|
|
|
Post by JED on Apr 23, 2021 13:01:41 GMT -6
So cool Jon
|
|
|
Post by JCON on Apr 25, 2021 17:48:58 GMT -6
That is crazy kool Jon!!!
|
|
patrick
FORUM FRIEND
Posts: 551
Likes: 1,297
|
Post by patrick on Apr 26, 2021 13:56:19 GMT -6
I was a former Ducati owner....An early 60s single .
|
|