|
Post by mike on Jul 25, 2020 23:44:45 GMT -6
This is how the car started. It was a hardtop. I first drill a hole into the rivet. With a number 50 drill. I then drill out the head of the rivet. Next I tap the hole with a number 2-56 thread tap. This picture shows how the screws fit. Out comes the WHEEL! And off goes the roof! This is how I prepare the car for reassembly. I only cut the roof off of this one. Tomorrow I plan to paint.
|
|
|
Post by BUCKY on Jul 26, 2020 0:24:28 GMT -6
Nice slicing!
|
|
|
Post by JCON on Jul 26, 2020 9:05:43 GMT -6
Very cool and nice little tutorial on body modifications of Hot-Wheels vehicles!
|
|
|
Post by dogfish7 (R.I.P.) on Jul 26, 2020 10:27:44 GMT -6
Thanks Mike.
|
|
|
Post by mike on Jul 27, 2020 0:41:27 GMT -6
|
|
|
Post by BUCKY on Jul 27, 2020 0:42:53 GMT -6
Brilliant red on this drop-top!
|
|
|
Post by mike on Jul 27, 2020 0:58:43 GMT -6
Thank you very much!
|
|
|
Post by JCON on Jul 27, 2020 9:02:28 GMT -6
That shows the lines well!!!
|
|
|
Post by mike on Jul 29, 2020 13:58:05 GMT -6
Thank you! I like that paint a lot!
|
|
|
Post by JCON on Jul 29, 2020 14:04:00 GMT -6
Are you using spray paints and what brand is it?
|
|
|
Post by mike on Jul 30, 2020 12:44:03 GMT -6
This is the paint I used.
|
|
|
Post by BUCKY on Jul 30, 2020 13:17:05 GMT -6
I've been wondering about those paints. They look good! Have you tried them on a styrene model?
|
|
|
Post by JCON on Jul 30, 2020 13:43:59 GMT -6
They do look cool, thanks for answering me about them Mike!
|
|
|
Post by mike on Aug 2, 2020 14:47:02 GMT -6
I've been wondering about those paints. They look good! Have you tried them on a styrene model? I have not painted any styrene with this paint yet. I will paint and report soon.
|
|
|
Post by mike on Aug 2, 2020 14:48:14 GMT -6
|
|
|
Post by JCON on Aug 2, 2020 16:30:57 GMT -6
I do like that color a lot!!!
|
|
|
Post by mike on Aug 2, 2020 17:54:05 GMT -6
Thank you! I like it too!
|
|