Post by mike on Apr 7, 2020 23:59:01 GMT -6
My grandson’s Shelby was missing the right tail light. Here is how I made one.
I made a mold with aluminum foil by pressing it tightly on and around the left light.
I mixed some liquid cement with pieces of red plastic.
I poured the mixture into the mold.
I waited about 24 hours, then removed the tail light.
I did not trim around the light. I used the extra material to glue the light in place.
I did the same thing with Dodge Dart side marker lights.
I used Sharpie pens to add more color to the lights.
This time I trimmed away the extra material.
I made a mold with aluminum foil by pressing it tightly on and around the left light.
I mixed some liquid cement with pieces of red plastic.
I poured the mixture into the mold.
I waited about 24 hours, then removed the tail light.
I did not trim around the light. I used the extra material to glue the light in place.
I did the same thing with Dodge Dart side marker lights.
I used Sharpie pens to add more color to the lights.
This time I trimmed away the extra material.
