|
Post by JCON on Nov 16, 2018 0:47:16 GMT -6
|
|
|
Post by BUCKY on Nov 16, 2018 5:04:40 GMT -6
This will be cool to watch!! Got my chair and my popcorn!!
|
|
|
Post by JCON on Nov 16, 2018 8:32:37 GMT -6
Glad to have you along Bucky!!!
|
|
|
Post by JCON on Nov 16, 2018 8:41:35 GMT -6
By the way Ben be careful laying out the tape as it does have a direction and you don't want seams where they shouldn't be... use a sharp knife to cut the edges after burnishing it down to the areas you want to trim... I used the handle of my x-acto knife to burnish the edges without tearing the tape...
|
|
Deleted
Deleted Member
Posts: 0
Likes:
|
Post by Deleted on Nov 16, 2018 15:17:29 GMT -6
By the way Ben be careful laying out the tape as it does have a direction and you don't want seams where they shouldn't be... use a sharp knife to cut the edges after burnishing it down to the areas you want to trim... I used the handle of my x-acto knife to burnish the edges without tearing the tape... Ty for the advice, I don't have the blue tape, mine is the light beige white kind. But I do understand what you're saying. When I get around to it Ill make sure of that!
|
|
|
Post by JCON on Nov 16, 2018 15:21:10 GMT -6
Glad to be of service my friend!!!
|
|
|
Post by BUCKY on Nov 16, 2018 15:52:34 GMT -6
The white tape will work, also, but I use the blue in case I hafta make an adjustment. Some of the white tape will leave glue residue if you remove it, and if it sticks to itself, you may hafta toss it and get another piece!!
|
|
|
Post by dogfish7 (R.I.P.) on Nov 16, 2018 19:22:42 GMT -6
Nice touch on the roof Joe.
|
|
|
Post by JCON on Nov 17, 2018 0:11:11 GMT -6
|
|
|
Post by BUCKY on Nov 17, 2018 20:04:31 GMT -6
Off to a great start, brother!!
|
|
|
Post by JCON on Nov 17, 2018 22:18:59 GMT -6
Thank you Bucky!!! Did you build one of these before?
|
|
|
Post by BUCKY on Nov 18, 2018 11:22:28 GMT -6
Not yet. I have one in the stash, tho. I'm taking notes on your build!!
|
|
|
Post by JCON on Nov 18, 2018 11:24:07 GMT -6
Well if you would get back to your bench and work on those 7 works in progress you could join me, lol!!!
|
|
|
Post by BUCKY on Nov 18, 2018 11:57:54 GMT -6
Thaaaat might take a minute!!
|
|
|
Post by JCON on Nov 18, 2018 13:18:44 GMT -6
Or three...
|
|
|
Post by JED on Nov 18, 2018 13:46:53 GMT -6
The trimming looks pretty cool Joe
|
|
|
Post by JCON on Nov 18, 2018 13:54:32 GMT -6
Thank you Jed!!!
|
|
Deleted
Deleted Member
Posts: 0
Likes:
|
Post by Deleted on Nov 18, 2018 17:00:17 GMT -6
Coming along Nicely!!
|
|
|
Post by JCON on Nov 18, 2018 17:01:14 GMT -6
Thanks Ben, just put the wheels and the bed together... will post a pic or two later...
|
|
|
Post by JCON on Nov 18, 2018 18:09:15 GMT -6
|
|